INTEGRALE /AUX – Three service integrated auxiliary power unit

Permanent magnets AC motors (PMAC) – Hipermmag series / 96Vdc40Kw + peak

  • Integrated System
  • High power / dimension ratio
  • Stand alone system
  • Best Efficiency in any Condition
  • One system for three Auxiliary Service
  • Fitting for electric and combustion commercial vehicles

INTEGRALE /AUX – 1

Permanent magnets AC motors (PMAC) – Hipermmag series / 96Vdc / 40Kw + peak

PRODUCT DESCRIPTION

The IET system for auxiliary services is composed by an electric motor connected to some different components with a mechanical transmission. Each service can be connected with the electric clutch. In this case each service can be connected to the motor only during the request.

In the carter there are three electromagnetic clutches, one for each auxiliary. When is needed to use one of these, the clucht is closed and the auxiliary rotate actuating the service (Steering Pump, Air Compressor, or P.T.O.). The three clutches can be also closed all together, but usually, when the services run, the steering pump clutch is not closed.

The actuation of the clutches and the electric motor is managed by the integrated controller, inverter VoltmaxX, and can be switched on manually by the operator.

The high efficiency of electric motor and inverter and the optimized rotation speeds reduce the power consumption of all auxiliary systems. High power density, compact dimensions and small weight make this system very effective and allows to save a lot of space on the vehicle.

It is a stand alone platform and can also equip combustion engine vehicles just adding battery packs.

TECHNICAL SPECIFICATIONS
DC Bus Voltage: 96Vdc
Type of motor: Permanent magnets AC motors (PMAC) – Hipermmag series
Power: 40kW + peak
Torque: 63Nm
Cooling system: Liquid cooling
Transmission type: Belt and electromagnetic clutches
Mass: ≤46kg
Motor efficency: ≥90%
Operating temperature: -25°C +50°C
Protection Level (IP): IP67
Communication: CANbus protocol – Digital and analog input/output; System configurable via software
Services: • A/C compressor for air conditioning or heat pump;
• Steering pump;
• Hydraulic pump for equipment.

Application

FULLY ELECTRIC CITY BUS

AGRICULTURAL APPLICATION

ELECTRIC AND COMBUSTION a VEHICLE

INTEGRALE /AUX – Three service integrated auxiliary power unit

Permanent magnets AC motors (PMAC) – Hipermmag series / 96Vdc / 19Kw

  • Integrated System
  • High power / dimension ratio
  • Stand alone system
  • Best Efficiency in any Condition
  • One system for three Auxiliary Service
  • Fitting for electric and combustion commercial vehicles

INTEGRALE /AUX – 2

Permanent magnets AC motors (PMAC) – Hipermmag series / 96Vdc / 19Kw

PRODUCT DESCRIPTION

This IET system for auxiliary services is composed by an electric motor with two output shaft connected to some different components by a belt and each ser vice can be connected to the motor only during the request.

One auxiliary is always running and is usually used for steering pump. Other two auxiliaries are activated by a belt using the rear shaft of the motor. Usually air condictioning system have an internal electromagnetic cluthc that can activate or deactivate the relative auxiliary.

The actuation of the clutches and the electric motor is managed by the integrated controller, inverter VoltmaxX.

The high efficiency of electric motor and inverter and the optimized rotation speeds reduce the power consumption of all auxiliary systems. High power density, compact dimensions and small weight make this system very effective and allows to save a lot of space on the vehicle.

It is a stand alone platform and can also equip combustion engine vehicles just adding battery packs.

TECHNICAL SPECIFICATIONS
DC Bus Voltage: Nominal voltage 48Vdc
Type of motor: Permanent magnets AC motors (PMAC) – Hipermmag series
Power: 19kW + peak
Torque: 46Nm
Cooling system: Air
Transmission type: Direct Transmission
Mass: ≤26kg
Motor efficency: ≥90%
Operating temperature: -25°C +50°C
Protection Level (IP): IP67
Communication: CANbus protocol – Digital and analog input/output; System configurable via software
Services: Two of the following Services:
• A/C compressor for air conditioning or heat pump;
• Steering pump;
• Hydraulic pump for equipment.

Application

FULLY ELECTRIC CITY BUS

AGRICULTURAL APPLICATION

ELECTRIC AND COMBUSTION a VEHICLE

INTEGRALE /AUX – Three service integrated auxiliary power unit

Permanent magnets AC motors (PMAC) – Hipermmag series / 48Vdc / 19Kw + peak

  • Integrated System
  • High power / dimension ratio
  • Stand alone system
  • Best Efficiency in any Condition
  • One system for three Auxiliary Service
  • Fitting for electric and combustion commercial vehicles

INTEGRALE /AUX – 3

Permanent magnets AC motors (PMAC) – Hipermmag series / 48Vdc / 19Kw + peak

PRODUCT DESCRIPTION

The auxiliary power units: ensure electric energy supplying when the vehicle engine is off, IET is Auxiliary power generators ensure a reliable power supply for the electrical systems in your vehicles while also saving on fuel.

Auxiliary power units provide commercial vehicles and mobile platforms with electrical energy that is tailored to the individual on-board system or electrical consumers such as drives. Our auxiliary power unit, also known as the auxiliary power unit or APU, is a robust and compact combination of PMA electric motor, clutches and services. It converts electric power based on-board hydraulic or pneumatic system requirements.

The APU assumes responsibility for the power supply independently of the vehicle’s main engine. On combustion engine vehicle, this enables to save on fuel, as the main engine does not need to be running constantly in order to operate your on-board systems.

TECHNICAL SPECIFICATIONS
DC Bus Voltage: 96Vdc
Type of motor: Permanent magnets AC motors (PMAC) – Hipermmag series
Power: 19kW
Torque: 46Nm
Cooling system: Air
Transmission type: Belt
Mass: ≤38kg
Motor efficency: ≥90%
Operating temperature: -25°C +50°C
Protection Level (IP): IP67
Communication: CANbus protocol – Digital and analog input/output; System configurable via software
Services: • A/C compressor for air conditioning or heat pump;
• Steering pump;
• Hydraulic pump for equipment.

Application

FULLY ELECTRIC CITY BUS

AGRICULTURAL APPLICATION

ELECTRIC AND COMBUSTION a VEHICLE